manualshive.com logo in svg

Panasonic KX-NS300, Features Manual

Share
Download
Panasonic KX-NS300 Features Manual Download Page 190

2.12.2  SIP Refer Transfer

Description

If enabled through system programming, calls transferred to a SIP trunk will be transferred using the SIP service
provider’s Transfer feature instead of the PBX’s.
The following types of transfer are available:

Attended Transfer

Transfer is completed after announcing the transferred party.
From the extension user’s perspective, this is the same as Call
Transfer with Announcement (

®

 2.12.1  Call Transfer).

Blind Transfer

Transfer is completed immediately after dialling the transfer
destination’s number.
This is similar to Call Transfer without Announcement (

®

2.12.1  Call Transfer), except that the transferrer does not hear
even a ringback tone; the transferred call is connected directly
to the destination.

Conditions

[General]

•

The availability of this feature depends on the SIP service provider.

•

Since the SIP service provider takes control of the transfer, the transferred call cannot be returned to the
PBX for further handling even if the transfer fails.

[Blind Transfer]

•

ISDN extensions and SIP extensions cannot use this feature.

•

This feature cannot be used when calling through DISA (

®

 2.16.1  Direct Inward System Access (DISA)).

Installation Manual References

4.4  Virtual Cards

User Manual References

1.4.1  Transferring a Call (Call Transfer)—

 Transferring to an Outside Party Using the SIP Service

PC Programming Manual References

9.10  PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW—Supplementary Service

→

Blind Transfer(REFER)

→

Attended Transfer(REFER)

190

Feature Guide

2.12.2 SIP Refer Transfer

Summary of Contents for KX-NS300





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands