Test Type
Available Cards
CS-INF loop back diagnosis
*
CSIF
Super frame synchronization
diagnosis
*
CSIF
Caller ID card loop back diagnosis
KX-NS1000 PBXs:
LCOT2
Legacy Gateways:
LCOT, ELCOT
To perform a card test
1.
Click on the
Status
cell of the card to be tested, and set it to "OUS".
2.
Click on the cell showing the card type.
A new window will be displayed.
3.
Select the
Card Test
option, and then click
Execute
.
The error report will be displayed. When all tests are completed, the words "Test End!" will be shown on
the last line of the output.
4.
Select an option:
•
Click
Capture
if you want to save the displayed information as a CSV file.
1.
Specify a save destination and file name.
2.
Click
Save
.
•
Click
Cancel
to return to the Diagnosis screen.
Network Loopback Test
Performs a remote loopback test on the PRI23 card.
Note
To perform this test, it is necessary to set
Loopback Test started by Network
Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—CO Setting
To perform a network loopback test
1.
Select
Point1
or
Point2
depending on the type of loopback test you want to perform.
The available selections may vary depending on the hardware version of the card.
2.
Click
Apply
.
Preparation for the test is complete. The test will start automatically.
3.
After the test is complete, select
Release
and click
Apply
.
4.
Click
Cancel
to return to the Test Menu screen.
Pair Port Test
Tests the combination of an extension port and CO line port to ensure that communication with the CO line
port can be carried out successfully. Only cards installed in legacy gateway KX-TDE/KX-TDA PBXs can be
tested.
The pair port test can be carried out using one LCOT or ELCOT card and one DHLC8, SLC8, SLC16,
MSLC16, ESLC16, EMSLC16, CSLC16, or ECSLC24 card.
Note
•
Cards installed in KX-NS1000 PBXs and legacy gateway KX-NCP PBXs cannot be tested using this
utility.
•
The cards to be used for testing must be installed in the same legacy gateway PBX.
Document Version 2016-03
PC Programming Manual
115
7.1.1 Utility—Diagnosis—Card Diagnosis
Summary of Contents for KX-NS1000
