Panasonic KX-NS1000, Pc Programming Manual

Page: 452 / 1294

9.27 PBX Configuration—[1-1]
Configuration—Slot—Port Property - PRI Port
Various settings can be programmed for each PRI port.
Main
The Shelf , Slot , and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot .
Port Type
Selects the port type.
Note
•
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on
another PBX.
•
ISDN extensions can belong to an incoming call distribution group or idle extension hunting group. In
this case, an MSN can be assigned.
Default
CO
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Feature Manual References
10.1.18 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
15.1.17 PRIVATE NETWORK FEATURES—QSIG
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
452 PC Programming Manual Document Version 2016-03
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port