Basic Setting
Parameter
Description
Language
Specifies the language to be displayed on the LCD.
Telephone Number
*2
Specifies the extension number of the KX-HGT100.
SIP ID
*2
Specifies the extension number of the KX-HGT100.
SIP Password
*2
Specifies the password for the KX-HGT100.
Proxy Address
*2
Specifies the IP address of the IPCMPR card.
Proxy Port
*2
Specifies the port number associated with the IP address entered in
Proxy
Address
.
Registrar Address
*2
Specifies the IP address of the IPCMPR card.
Registrar Port
*2
Specifies the port number associated with the IP address entered in
Registrar
Address
.
SIP Domain
*2
Specifies the IP address of the IPCMPR card.
Register Expire
Specifies the length of time (1–4294967295 seconds) that the KX-HGT100
sends the REGISTER message to the PBX.
*1
Session Expire
Specifies the length of time (60–65535 seconds) after which the KX-HGT100
terminates SIP sessions when no communication is detected.
*1
This setting will be overwritten by the SIP Location Hold Time Max. setting of the PBX. For details, refer to "3.17 [1-1] Slot—Card
Property - Virtual SIP Extension" in the PC Programming Manual.
*2
These parameters can also be programmed by the KX-HGT100. For details about the procedure for the KX-HGT100, refer to Basic
Setting programming through the KX-HGT100.
Document Version 2009-12
IP Networking Guide
85
4.5.1 Registering IP Telephones
Summary of Contents for KX-NCP500
