Follow the procedure below to assign IP addressing information manually.
To set the IP addressing information
To start programming
Supply power to the KX-HGT100.
Select "Set network".
Press OK.
Select "STATIC".
Press OK.
To end programming
Press
PROGRAM.
IP Address*
1
Press OK.
Press OK.
Subnet Mask Address*
2
Default Gateway Address*
3
Press OK.
Press PROGRAM.
C. Tone
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
62
IP Networking Guide
Document Version 2009-12
4.4.1 Assigning the IP Addressing Information
Summary of Contents for KX-NCP500
