4.5 Registering IP Telephones
4.5.1 Registering IP Telephones
After the programming of the PBX and IP telephone is finished, the IP telephone must be registered to the
PBX. This is done using the Maintenance Console.
Registration of IP-PTs
1.
a.
Under
Configuration
, click
Slot
.
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot
at the top of the screen, and
click
Select Shelf
. Move the mouse pointer over
the V-IPEXT32 card. A menu will be shown under
the mouse pointer.
c.
Click
Port Property
.
To register the IP-PT by entering the MAC address
directly:
2.
If the
Connection
column for the port is
INS
, click
INS
, and then click
OUS
on the dialog box to change
the port’s status.
3.
Enter the MAC address of the IP-PT in the
IP Phone
Registration ID (MAC Address)
box.
4.
Click
Apply
.
Once the IP-PT is successfully registered, the status
of the IP-PT will update to show "Registered".
5.
In the
Connection
column for the port, click
OUS
, and
then click
INS
on the dialog box to change the port’s
status.
To register the IP-PT using the wizard:
2.
Click
Registration
.
A dialog box will appear. Non-registered (available)
extension numbers and names are displayed on the
left.
Document Version 2009-12
IP Networking Guide
77
4.5.1 Registering IP Telephones
Summary of Contents for KX-NCP500
