To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
PBX IP Address
Select "Secondary PBX".
ENTER
ENTER
Continued from previous page
To the VLAN settings
Press "STORE".
STORE
To end programming
To set VLAN parameters
OR
The IP-PT will reboot
and can then be
registered to the PBX.
Return to the
Menu screen.
Return to the
Menu screen.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Document Version 2009-12
IP Networking Guide
57
4.4.1 Assigning the IP Addressing Information
Summary of Contents for KX-NCP500
