manualshive.com logo in svg

Panasonic KX-NCP500, Manual

The Panasonic KX-NCP500, a versatile communication system, allows businesses to streamline their operations. Unlock its maximum potential by accessing the comprehensive programming manual. Download it for free from our website to effortlessly configure and customize your KX-NCP500, maximizing productivity and efficiency for your organization.

Share
Download
background image

1.2.3  Gatekeeper

The following are the general functions of a gatekeeper:

•

Dialed number-to-IP address translation

•

Authentication

•

Bandwidth control

The gatekeeper provides these network management functions to registered clients. To register with the
gatekeeper, you need to configure the V-IPGW16 card to use the gatekeeper and program the GK Settings
table through system programming. For details, refer to "3.9  [1-1] Slot—Shelf Property - Virtual IP Gateway
—

Gatekeeper Available" and "3.10  [1-1] Slot—Shelf Property - Virtual IP Gateway—GK Settings" in the

PC Programming Manual. After programming, the V-IPGW16 card attempts to register with the gatekeeper
using registration information such as the IP address of the IPCMPR card, and destination telephone numbers
specified in the GK Settings table.

Note

•

For more information about gatekeeper functions, consult the documentation of the gatekeeper.

•

When using a gatekeeper, make sure to choose a compatible model. For more information about
gatekeeper compatibility with the V-IPGW16 card, consult a certified dealer.

10

IP Networking Guide

Document Version  2009-12  

1.2.3 Gatekeeper

Summary of Contents for KX-NCP500

































































































Reviews:

No comments

Related manuals for KX-NCP500

NEC Univerge SV9100 Configuration Note preview
Univerge SV9100
Brand: NEC Pages: 74
NEC Univerge SV9100 Configuration Manual preview
Univerge SV9100
Brand: NEC Pages: 37
Planet IPX-1900 Quick Installation Manual preview
IPX-1900
Brand: Planet Pages: 14

Brands by name

Popular brands

Load more brands