KX-NT321
To end programming
The IP-PT will reboot
and can then be
registered to the PBX.
After assigning
the IP addresses
Select "QoS".
Press SP-PHONE.
Select "VLAN".
Press SP-PHONE.
Press STORE.
Press HOLD three
times to return to the
Menu screen.
Select "VLAN (Enable)".
Press SP-PHONE.
VLAN ID
VLAN Priority*
1
To set the VLAN ID for the primary port
0–7
1–4094
Select "Priority".
Select "VLAN (Primary)".
Press SP-PHONE.
Press SP-PHONE.
Select "VLAN ID".
Press SP-PHONE.
To set the VLAN ID for the secondary port
VLAN ID
VLAN Priority*
1
1–4094
0–7
Select "VLAN (Secondary)".
Press SP-PHONE.
Select "VLAN ID".
Select "Priority".
Press SP-PHONE.
Press SP-PHONE.
*1
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
Document Version 2009-12
IP Networking Guide
65
4.4.2 Setting the VLAN Parameters
Summary of Contents for KX-NCP500
