Panasonic KX-FMC230 Operating Instructions Manual Download Page 95

Page: 95 / 128

Help

For Assistance, Call 1-800-435-7329

Error Messages

CODE

MEANING

PRINTED MESSAGE

Error messages on printed reports

When a problem has occurred, one of the following messages will be printed on the transmission and journal
reports.

COMMUNICATION ERROR

DOCUMENT JAMMED

ERROR-NOT YOUR UNIT

MEMORY FULL

NO DOCUMENT

OTHER FAX NOT RESPOND

PRESSED THE STOP KEY

THE COVER WAS OPENED

A transmission or reception error occurred. Try again or check
with the other party.

A document is jammed. Remove the jammed document (p. 109).

A transmission or reception error occurred because of a problem
with the other party’s machine. Check with the other party.

The document was not received due to memory being full.

The document was not fed into the unit properly. Try again.

The receiving unit was busy or ran out of recording paper. Try
again.

The START/COPY/SET button was pressed when the document
was not set properly. Set the document properly and press the
START/COPY/SET button after confirming the fax tone.

The other party’s machine is not a facsimile. Check with the other
party.

The STOP button was pressed and fax communication was
canceled.

The front cover was opened during fax transmission.

Fax communication was successful.

41–72

—

Summary of Contents for KX-FMC230

































































































































Search results

Summary of Contents for KX-FMC230

Reviews:

Related manuals for KX-FMC230

Brands by name

Popular brands

Panasonic KX-FMC230, Operating Instructions Manual

Search results

Summary of Contents for KX-FMC230

Reviews:

Related manuals for KX-FMC230

Brands by name

Popular brands