Panasonic KX-FMC230 Operating Instructions Manual Download

Page: 108 / 128

108

For Assistance, Call 1-800-435-7329

Pull the recording paper set lever forwards, then pull out
the jammed recording paper from the recording paper
entrance.
Push the set lever back.

When paper has jammed near the recording paper exit

The display will show the following message.

Remove the jammed paper as follows.

REMOVE PRINTOUT

When paper has jammed near the recording paper
entrance

The display will show the following message.

Remove the jammed paper as follows.

CHECK PAPER

Tilt the unit up and push the jammed recording
paper out through the triangular window on the
bottom of the unit.

Remove the jammed recording paper from the
recording paper exit.

If you cannot remove the jammed paper, remove
it by following steps 1–4 on page 107.

Triangular
window

Replace the film cartridge by matching the blue
label side of the cartridge with that on the unit.

Close the front cover securely by pushing down on
both ends.

Blue labels

Film cartridge

Recording
paper set
lever

Jams

Summary of Contents for KX-FMC230

































































































































Search results

Summary of Contents for KX-FMC230

Reviews:

Related manuals for KX-FMC230

Brands by name

Popular brands

Panasonic KX-FMC230, Operating Instructions Manual

Search results

Summary of Contents for KX-FMC230

Reviews:

Related manuals for KX-FMC230

Brands by name

Popular brands