Panasonic KX-FMC230 Operating Instructions Manual Download Page 113

Page: 113 / 128

113

Help

For Assistance, Call 1-800-435-7329

Replacing the handset battery with the spare battery

To prevent memory loss, replace the battery within 5 minutes.

Press the marked portion to unlock and slide the
battery cover to remove it.

Remove the battery.

Remove the spare battery from the main unit.

Insert the handset battery in the main unit
observing the proper polarity.

Insert the spare battery in the handset observing
the proper polarity.
When finished, replace the battery cover on the
cordless handset.

Note:

If the TALK/BATT LOW indicator flashes slowly even when the handset battery has been fully charged, it is
time to replace the battery with a new one. Remember to fully charge the new battery after battery
replacement.

Please use only a Panasonic P-P592 (KX-A92) battery. To order, call toll free 1-800-332-5368.

Do not touch the bottom of the cradle because it may be hot.

Battery cover for
cordless handset

Battery

Battery

Summary of Contents for KX-FMC230

































































































































Search results

Summary of Contents for KX-FMC230

Reviews:

Related manuals for KX-FMC230

Brands by name

Popular brands

Panasonic KX-FMC230, Operating Instructions Manual

Search results

Summary of Contents for KX-FMC230

Reviews:

Related manuals for KX-FMC230

Brands by name

Popular brands