15
KV-SSM100/KV-SS1100 Network Scanner Adapter Administrator’s Guide
BEFORE YOU BEGIN
Before configuring the KV-SSM100/KV-SS1100, confirm that the following steps have been completed:
Power cable is connected to device.
1.
Connect the AC adapter to the DC-in jack of the KV-SSM100/KV-SS1100.
2.
Connect the AC adapter to the power cord.
Caution:
The AC adapter is to be used with the KV-SSM100/KV-SS1100 only.
3.
Plug the power cord into an electrical outlet.
Panasonic scanner is installed.
1.
Connect USB cable from scanner to adapter.
Connection method is known:
Wired:
Cable is connected from adapter’s Ethernet port to network switch/router.
Wireless:
Ensure that wireless router is working correctly and that there is
no
network (Ethernet) cable attached to the adapter.
Have the following information available:
n
SSID
(e.g., NETGEAR62)
n
Security Mode
(Open, WEP, WPA Personal, WPA2 Personal).
Note:
WPA Enterprise and WPA2 Enterprise Wi-Fi networks are not supported at this time.
Network printer
is installed (if using Scan to Printer function).
1.
Connect network (Ethernet) cable from printer to adapter.
Network is configured.
See
Prerequisites
to follow…
8
First-time Operation
NOTE
l
Note that the computer consumes electricity even when the
computer power is off. If the battery pack is fully charged,
the battery will fully discharge in the following period of time:
Status
FZ-VZSU94W
FZ-VZSU95W
(optional)
When power is off Approx. 7 weeks Approx. 17 weeks
In sleep
*2
Approx. 9 days
Approx. 20 days
In hibernation Approx. 7 weeks Approx. 17 weeks
*2
<Only for model with LAN>
If “Wake Up from wired LAN” is enabled, the period
of time will be shorter.
2 Connect your computer to a power out-
let.
The battery charging starts automatically.
CAUTION
l
Do not disconnect the AC adaptor until the first-time
operation procedure is completed.
l
When using the computer for the first time, do not con-
nect any peripheral device (including wired LAN cable)
except the battery pack and AC adaptor.
l
Handling the AC adaptor
Problems such as sudden voltage drops may arise dur-
ing periods of thunder and lightning. Since this could
adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless
running from the battery pack alone.
3 Turn on the computer.
Press and hold the power switch (A) (longer than 2
seconds) until the power indicator (B) lights.
CAUTION
l
Do not press the power switch repeatedly or do not
hold the power switch for ten seconds or longer.
l
Any changes from the default setting of the Setup Util-
ity must not be made until the First-time Operation is
completed.
㪈
㪉
3
B
A
KV-SSM100
KV-SS1100
