![background image](http://html.mh-extra.com/html/panasonic/js-970-series/js-970-series_operating-instructions-manual_264514015.webp)
15
Safety Precautions
■
POS Workstation: JS-970WP / JS-970WS series
IMPORTANT
Install a socket outlet adjacent to the equipment so that it will be easily accessible.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
ATTENTION
Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.
Mettre au rebut les batteries usagées conformément aux instructions.
Avoid radio frequency interference
Do not place the POS Workstation near a television or radio receiver.
Avoid stacking
Do not place heavy objects on the POS Workstation.
Keep small objects away
Do not insert paper clips or other small objects into POS Workstation.
There are risks of heat, fire and explosion.
Keep dry
There are risks of heat, fire and explosion.
Do not disassemble the POS Workstation
Do not attempt to disassemble the POS Workstation. There are risks of heat, fire and
explosion.
Do not touch the plug with wet hands
There is a risk of electric shock.
Be certain to plug fully into the outlet
There are risks of electric shock and fire.
Unplug this unit from power outlets if it emits smoke, an abnormal smell or makes
unusual noise.
These conditions can cause fire or electric shock. Confirm that smoke has stopped and
contact an authorized service center.
When unplugging, make sure to hold the body of the plug
If the power cord or outlet is damaged, there is a risk of electric shock, short circuit or fire.
Do not use a damaged power cord or plug
There are risks of electric shock and fire.
Do not use the provided power cord and the AC adapter for anything other than the
POS Workstation.
There are risks of electric shock and fire.
English
Summary of Contents for JS-970 Series
