49
Item
Specifications
Mid Range Model
High End Model
Rear Display
(Option)
Customer Display
20 Columns × 2 Rows Vacuum Fluorescent Display
(Option)
(
*
10) (
*
11)
2nd LCD Display 12.1 type 2nd LCD Display (Option)
(
*
10) (
*
12)
ID Module
(Option)
Magnetic Stripe
Reader
ISO Track1,2 + JIS II Track (Option)
Supported OS
Windows
®
7 Pro for Embedded Systems
Windows
®
Embedded POSReady 7
Windows
®
Embedded 8.1 Pro
Windows
®
Embedded 8.1 Industry Pro Retail
(The supported OSes are limited to the above four
types.)
Environmental
Condition
Operating
Temperature
+5 °C to +40 °C (+41 °F to +104 °F)
Operating
Humidity
15 % RH to 85 % RH (no condensation)
Power Consumption
Approx. 1 W
(When power is OFF by
the power switch)
Approx. 22 W
(Operating)
(
*
13)
Approx. 4 W
(When power is OFF by
the power switch)
Approx. 40 W
(Operating)
(
*
13)
Dimensions
Approx. 325 mm (W) × 293 mm (D) × 353 mm (H)
(Approx. 12.8 in. (W) × 11.5 in. (D) × 13.9 in. (H)) /
with 12.1 type Display installed
Approx. 367 mm (W) × 293 mm (D) × 374 mm (H)
(Approx. 14.4 in. (W) × 11.5 in. (D) × 14.7 in. (H)) /
with 15 type Display installed
Approx. 407 mm (W) × 293 mm (D) × 424 mm (H)
(Approx. 16.0 in. (W) × 11.5 in. (D) × 16.7 in. (H)) /
with 17 type Display installed
Weight
Approx. 11.3 k
g
(Approx. 25.0 lbs.)
(
*
14)
*
1 : The LCD, made with high-precision technology, may have a constantly lit or unlit
dot(s) on a part of its screen, but this is not a failure (electric pixel defect, etc.: 8
dots or less).
*
2 : 15 type Display supports projected-capacitive touch panel.
English
Summary of Contents for JS-970 Series
