86
86
87
• The maximum number of concurrent access user
varies depending on the maximum image size and
transmission format.
[FTP access to camera]
Select "Allow" or "Forbid" to determine whether to
allow or forbid the FTP access to camera.
Default:
Forbid
[Bandwidth control(bit rate)]
Select the total bit rate for data transmission from the
following.
Unlimited/ 64kbps/ 128kbps/ 256kbps/ 384kbps/
512kbps/ 768kbps/ 1024kbps/ 2048kbps/ 4096kbps/
8192kbps
SW355
Default:
Unlimited
Note:
• When selecting "64kbps", select "Off" for "Audio
transmission/reception" on the "Audio" tab.
(
☞
Page 63)
• Select "128kbps" or a faster rate to carry out the
live transmission of JPEG images and the FTP peri-
odic image transmission simultaneously.
• When "Bandwidth control(bit rate)" is set low, taking
a picture using the snap shot button may not func-
tion depending on the use environment.
In this case, select "QVGA" for "Image capture size"
of "JPEG" on the [JPEG/H.264] (or [JPEG/MPEG-4])
tab or set "Image quality setting" of "JPEG" lower.
[Easy IP Setup accommodate period]
Select "20min" or "Unlimited" to determine how long
the network setting operation using the Panasonic IP
setting software can be allowed since the camera starts
up.
20min:
The camera information display and the net-
work setting operation using the Panasonic IP set-
ting software are allowed for 20 minutes since the
camera starts up.
Unlimited:
The camera information display and the net-
work setting operation using the Panasonic IP set-
ting software are allowed without time limitation.
Default:
20min
