Panasonic i-Pro WV-SW355 Operating Instructions Manual Download Page 5

Page: 5 / 130

Abbreviations

The following abbreviations are used in these operating instructions.
Microsoft

Windows

7 Professional (64-bit) and Microsoft

Windows

7 Professional (32-bit) are described as

Windows 7.
Microsoft

Windows Vista

Business SP1 (32-bit) is described as Windows Vista.

Microsoft

Windows

XP Professional SP3 is described as Windows XP.

Windows

Internet Explorer

8.0, Windows

Internet Explorer

7.0 and Microsoft

Internet Explorer

6.0 are

described as Internet Explorer.
SDHC/SD memory card is described as SD card or SD memory card.
Universal Plug and Play is described as UPnP

Viewer software

It is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. This software

can be installed directly from the camera or by double clicking "nwcv4Ssetup.exe" on the CD-ROM provided, and

then following the on-screen instructions.

Important:

• The default setting of "Automatic installation of Viewer software" is

"On". Follow the instructions on page 128 when the message is

displayed on the information bar of the browser.

• When the "Live" page is displayed for the first time, the install wiz

ard of the ActiveX control required to display images from the cam-
era will be displayed. Follow the instructions of the wizard.

• When the install wizard is displayed again even after completing

the installation of the ActiveX, restart the PC.

• The viewer software used on each PC should be licensed individu

ally. The number of installations of the viewer software from the
camera can be checked on the [Upgrade] tab of the "Maintenance"
page (

☞

page 112). Refer to your dealer for the software licensing.

Summary of Contents for i-Pro WV-SW355



































































































































Search results

Summary of Contents for i-Pro WV-SW355

Reviews:

Related manuals for i-Pro WV-SW355

Brands by name

Popular brands

Panasonic i-Pro WV-SW355, Operating Instructions Manual

Search results

Summary of Contents for i-Pro WV-SW355

Reviews:

Related manuals for i-Pro WV-SW355

Brands by name

Popular brands