Panasonic HYBRID IP-PBX KX-TDA200, Features Manual

Page: 41 / 464

1.1.3.2 Ring Tone Pattern Selection
Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
[Ring Tone Patterns]
1 280 ms*
Single
Double
Triple
S-Double
* The duration of a ring tone may vary by country/area.
[Ring Tone Pattern Table]
The ring tone pattern table is categorised into three parts, each containing a specified number of pattern plans.
The ring tone pattern table is categorised as follows:
•
Incoming Trunk Calls: each pattern plan can assign a ring tone pattern for each trunk group.
®
4.14 [2-8-1] Ring Tone Patterns—Call from CO
•
Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
®
4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
•
Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tones
assigned to certain features (e.g., timed reminder).
®
4.16 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
Table
No.
Intercom
Call/Hold
Recall
Trunk Call/Hold
Recall
Doorphone Call
Timed Re-
minder
Call Back LCS
External
Sensor
TRG1 TRG2 ... Port 1 Port 2 ...
1 Double Single Single
2 Single Double Double
: : : : : : : : : : : :
Conditions
•
"
PT Ring Off Setting
" can be enabled or disabled through system programming. If disabled, PT users
cannot turn incoming call ringing off for their extension.
•
For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be
assigned through personal programming.
Feature Guide 41
1.1.3 Incoming Call Indication Features