Panasonic HYBRID IP-PBX KX-TDA200, Features Manual

Page: 176 / 464

1.13.2 Call Park
Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be used
as a transferring feature; this releases the user from the parked call to perform other operations. The parked
call can be retrieved by any extension user.
Conditions
•
Automatic Call Park
It is possible to select an idle parking zone automatically.
•
Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the originator
will hear a busy tone. Retrying is possible while hearing the busy tone by selecting parking zone or a vacant
zone.
•
Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, Call Park Recall will be heard at the
Transfer Recall destination assigned to the extension which parked the call. If the destination is engaged
in a call, the Hold Alarm will be heard.
•
If a parked trunk call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
•
Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
A flexible button can be customised as the Call Park button. It shows the current status of the preset parking
zone as follows:
Light pattern Status
Slow red flashing Parked in the preset parking zone
Off No parked call
•
Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically. A
flexible button can be customised as the Call Park (Automatic Park Zone) button.
•
Call Park Retrieve Deny
If an extension user cannot call certain extensions on a COS basis (
®
1.1.2.2 Internal Call Block), he
cannot retrieve the parked call which the extensions made.
PC Programming Manual References
4.4 [2-3] Timers & Counters
→ Recall—Call Park Recall
→ Recall—Disconnect after Recall
4.8 [2-6-1] Numbering Plan—Main—Features— Call Park / Call Park Retrieve
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (or Ringing Tone Type Number) (for Call Park)
176 Feature Guide
1.13.2 Call Park