131
VQT1Z27
∫
If the driver has not been
recognised properly
Use the following methods to enable it to be
recognised.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
∫
To disconnect USB cable safely
1
Double click the
(
) icon in task
tray displayed on the PC.
≥
Depending on your PC’s settings, this icon
may not be displayed.
2
Select [USB Mass Storage Device] and
click [Stop].
3
Verify [MATSHITA HDC-TM300/SD USB
Device] or [MATSHITA HDC-TM300/MEM
USB Device] is selected and click [OK].
Verify [MATSHITA HDC-HS300/SD USB
Device] or [MATSHITA HDC-HS300/HDD
USB Device] is selected and click [OK].
HDCTM300&HS300EB-VQT1Z27_mst.book 131 ページ 2009年1月21日 水曜日 午後3時7分