Panasonic HDC-HS300, Operating Instructions Manual

Page: 81 / 160

81
VQT1Z27
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥ Press the FUNCTION button. ( l 79)
1
Touch [SHTR] or [IRIS].
≥ When using the viewfinder, press the
FUNCTION button. (
l 79)
2
Touch / to adjust settings.
≥
When using the viewfinder, rotate the multi
manual ring and set it. (
l
79)
: Shutter speed:
1/50 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/25 and
1/8000.
≥
The shutter speed closer to 1/8000 is faster.
≥
The shutter speed will be set between 1/2 and
1/2000 in still picture recording mode.
: Iris/Gain value:
CLOSE
#
(F16 to F2.0)
#
OPEN
#
(0dB to
18dB)
≥ Value closer to [CLOSE] darken the image.
≥
Value closer to [18dB] brighten the image.
≥
When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
≥
To return to auto setting, press the FUNCTION
button again. When using a viewfinder, press
the FUNCTION button to select the
, rotate
multi manual ring to select [CANCEL], and
press the FUNCTION button again.
≥
When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
≥ When the shutter speed is set lower than 1/12
in the still picture recording mode, it is
recommended using a tripod. Also, white
balance cannot be set. The shutter speed will
be set to 1/25 when the power is turned on
again or when the quick start is performed.
≥
If you increase the shutter speed manually, the
noise on the screen may increase.
≥ You may see a band of light around the object
that is shining very bright, or having very high
reflection.
≥
During normal playback, image movement
may not look smooth.
≥
If you record an extremely bright object or
record under indoor lighting, colour and screen
brightness may change or a horizontal line
may appear on the screen. In this case, record
in auto mode or set the shutter speed to 1/100
in areas where the power supply frequency is
50 Hz, or 1/125 in areas of 60 Hz.
Manual iris/gain adjustment
≥
Luminance level and histogram are displayed
during the iris adjustment. (
l 74, 75)
≥
If the gain value is increased, the noise on the
screen increases.
≥
Depending on the zoom magnification, there
are iris values that are not displayed.
Manual shutter speed/iris adjustment
F
IRIS SHTR WB
1/100 100 1/100
SHTR
IRIS
HDCTM300&HS300EB-VQT1Z27_mst.book 81 ページ ２００９年１月２１日 水曜日 午後３時７分