41
VQT1Z27
∫
Adjusting the brightness of the
viewfinder
1
Extend the viewfinder and open
the LCD monitor.
2
Select the menu. (
l
31)
≥
The viewfinder turns on.
3
Touch [BRIGHTNESS].
4
Touch
/
to adjust the
setting.
≥
After adjustments are made if no operations
are performed for about 2 seconds, the bar will
disappear.
5
Touch [ENTER].
≥
Touch [EXIT] or press the MENU button to
complete the setting.
¬
Change the mode to
or
.
Extend the viewfinder and rotate the
LCD monitor towards the lens side.
≥
LCD monitor and viewfinder are turned on
during the face-to-face recording when the
viewfinder is extended.
≥
The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
≥
Record by viewing the image in the viewfinder
during the face-to-face recording.
≥
Only some indications will appear on the
screen. When
°
appears, return the direction
of the LCD monitor to normal position and
check the warning/alarm indication. (
l
138)
[SETUP]
#
[EVF SET]
#
[YES]
Recording showing the
contents to a partner
HDCTM300&HS300EB-VQT1Z27_mst.book 41 ページ ２００９年１月２１日 水曜日 午後３時７分
