78
VQT1Z27
Relay recording
≥
It does not allow the relay recording of still
pictures. However, even still pictures are
recorded to the SD card after relay recording.
≥
is displayed on the thumbnail display
during the playback of the scene that was relay
recorded on the built-in memory.
Anti-Ground-Shooting (AGS)
≥
The AGS function may activate and cause the
unit to pause the recording if you are recording
a subject right above or right below you.
Auto slow shutter
≥
When the shutter speed becomes 1/25, the
screen may be seen as if frames are missed
and afterimages may appear.
Digital cinema colour
≥
When motion pictures recorded while this
function is turned [ON] are played back
with a TV not compatible with x.v.Colour
™
,
colours may not be reproduced properly.
≥
To play back images recorded in the digital
cinema colour with vivid colours of wider colour
ranges, a device compatible with x.v.Colour
™
is required. When these images are played
back with devices other than ones compatible
with x.v.Colour
™
, it is recommended to record
the images after this function is turned [OFF].
≥
x.v.Colour
™
is a name for devices that are
compatible with the xvYCC format, an
international standard for expanded colour in
motion pictures, and that follow the rules for
signal transmission.
Wind noise reduction
≥
When the Intelligent auto mode is set to on,
[WIND CUT] is set to [ON], and the setting
cannot be changed.
≥
The sound quality may be changed if this
function is activated in strong winds.
≥
If wind sound cannot be reduced with the wind
noise reduction function alone, set [BASS
SETTING] to [LOWCUT]. (
l
74)
Microphone setup
≥
If you wish to record higher quality sound and
maintain realism even when zooming in, for
instance recording a music recital, we
recommend setting [MIC SETUP] to
[SURROUND].
Microphone level
≥
When the Intelligent auto mode is on, the
setting is fixed to [AUTO] and cannot be
changed.
≥
When [MIC SETUP] is [ZOOM MIC], the
volume will be different depending on the zoom
rate.
≥
Audio becomes stereo (2 ch) when input is
from an external microphone, and the front left
and front right gain values only work.
≥
The microphone input level meter shows the
largest volume for the microphones.
≥
You cannot record with the audio completely
muted.
Luminance
≥
Luminance is displayed while adjusting [IRIS]
even if [DISPLAY] is set to [OFF].
Histogram
≥
Histogram is displayed while adjusting [IRIS]
even if [DISPLAY] is set to [OFF].
Hi-speed burst shooting
≥
If you turn off the power or change the mode to
, this function is cancelled.
≥
The maximum number of times you can record
on a media: 15.
(In the case of SD cards it is the maximum
number of recordable scenes per card.)
≥
Colour balance and brightness on the screen
may change with some light sources such as
fluorescent lamps.
≥
Image quality is different from ordinary still
picture recording.
AF assist lamp
≥
A conversion lens (optional) can block the AF
assist lamp, and it will become harder to adjust
the focus.
≥
When the Intelligent auto mode is on, the setting
is fixed to [AUTO] and cannot be changed.
≥
Set to [OFF] when you would not like the AF
assist lamp to illuminate in dark environment,
such as when you are recording animals in
dark. It will become harder to adjust the focus.
HDCTM300&HS300EB-VQT1Z27_mst.book 78 ページ ２００９年１月２１日 水曜日 午後３時７分
