74
VQT1Z27
Function
Effect/Setting method
Bass setting
Change the lower setting of the built-in microphone according
to your choice.
≥
Change the mode to
.
≥
The intelligent auto mode is set to off. (
l
45)
Select the menu. (
l
31)
[RECORD SETUP]
#
[BASS SETTING]
#
desired setting
[0dB]/[+3dB]/[+6dB]/[LOWCUT]
≥
Normally set to [0dB].
≥
Select [+3dB] or [+6dB] to get strong power feeling at bass level.
Select [LOWCUT], when recording is done outside in strong wind
or when wind noise cannot be reduced only with the wind noise
reduction function.
Zebra
A
Zebra pattern
Parts where white saturation (colour saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥
Change the mode to
or
.
≥
The Intelligent auto mode is set to off. (
l
45)
Select the menu. (
l
31)
[RECORD SETUP]
#
[ZEBRA]
#
[ON]
≥
It is possible to set from the quick menu in manual mode. (
l
32)
≥
You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain) (
l
81).
≥
The zebra pattern does not appear on the images actually
recorded.
Luminance
[OFF]:
Not display
[ANYTIME]:
Constantly display
[ON ADJUST]:
Display only when [IRIS] is
adjusted. (
l
81)
A
Luminance display frame
B
Luminance level
Displays the luminance level of the centre of the screen
(luminance display frame) in %.
It makes the adjustment of the brightness of the object easier,
by checking the luminance level of the object, when recording
same object in different surroundings.
Adjust the brightness using [IRIS]. (
l
81)
≥
Change the mode to
or .
≥
The Intelligent auto mode is set to off. (
l
45)
Select the menu. (
l
31)
[RECORD SETUP]
#
[LUMINANCE]
#
desired setting
≥
It is possible to set from the quick menu in manual mode. (
l
32)
≥
This function’s default setting is [ON ADJUST].
≥
Luminance level is displayed between [0%] and [99%]. It will be
displayed as [99% ] when it is over 99%.
50%
HDCTM300&HS300EB-VQT1Z27_mst.book 74 ページ ２００９年１月２１日 水曜日 午後３時７分
