Panasonic HC-X2 Operating Instructions Manual Download | Manualshive

Page: 79 / 313

background image

Menu – [THUMBNAIL] menu

79

[THUMBNAIL] menu

Performs confirmation or deleting of the recording clip.
This menu can be set when the thumbnail screen is displayed.

[PLAYBACK]

Sets the playback of recorded clips.
[ALL SLOT] will always be selected when you switch from the camera image screen to the thumbnail screen.

[CLIP SEL]

Selects a clip to be displayed on the thumbnail screen.

(Factory setting: [ALL SLOT])

[RESUME PLAY]

Select if the playback is to start from the position the playback has stopped or not.

(Factory setting: [OFF])

[CLIP]

The clip can be protected or copied to a different memory card.

[DISPLAY]

Sets the display of the thumbnail screen.

[DATA]

Selects the content to be displayed in the time code display area.

(Factory setting: [START TC])

[ALL SLOT]

Displays the clips recorded on all the memory cards in each card slot.

[SLOT1]

Displays only the clips recorded on the memory card in card slot 1.

[SLOT2]

Displays only the clips recorded on the memory card in card slot 2.

[SAME FORMAT]

Displays only the clips recorded in the same format as the system format.
Clips recorded in the same format means that each item of [FREQUENCY], [FILE FORMAT], and [REC
FORMAT] in the [SYSTEM] menu matches the current setting status.

[ON]

Plays back from the position where playback has stopped.

[OFF]

Always starts the playback from the beginning of the clip.

[PROTECT]

[SELECT]

Protect the clip so it is not mistakenly deleted.
Select the clip to protect, and set protection.

[DELETE]

[ALL]

Deletes all the clips displayed in the thumbnail screen.
The clip that is not displayed in the thumbnail screen is not deleted.

[SELECT]

Select the clip to delete, and delete it.

[COPY]

[ALL]

Copies all clips to a different memory card.

[SELECT]

Selects the clip to copy, and copies the clip to a different memory card.

[INFORMATION]

Displays the detailed information of the clip.

•

The clip recorded in MOV format/MP4 format cannot be copied.

[START TC]

Displays the time code value at the start of the recording.

[CLIP NAME]

Displays clip names.

«
...
77
78
79
80
81
...
»

Summary of Contents for HC-X2


























































































































































































































































































































Reviews:

No comments

Related manuals for HC-X2

Super-600 Electro

Brand: Yashica Pages: 25

Brand: RoadScan Canada Pages: 14

Brand: SMTAV Pages: 52

Brand: JVC Pages: 24

Brand: JVC Pages: 17

Brand: JVC Pages: 9

Brand: JVC Pages: 5

Brand: JVC Pages: 9

Brand: JVC Pages: 56

Brand: JVC Pages: 48

Brand: JVC Pages: 39

Brand: JVC Pages: 71

Brand: JVC Pages: 60

Brand: JVC Pages: 60

Brand: JVC Pages: 68

Brand: JVC Pages: 68

Brand: JVC Pages: 84

Brand: JVC Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands