Special recording function – Background recording
199
Ending background recording
1
Press and hold the USER button to which [BACKGR PAUSE] is assigned for
approximately 5 seconds or touch and hold the USER button icon for approximately
5 seconds and release.
The background recording stops on card slot 2.
The background recording on card slot 2 can also be stopped by pressing and holding the <EXIT> button for approximately
5 seconds.
•
Records on both card slot 1 and card slot 2 in the format set in the [SYSTEM] menu.
•
Background recording cannot be performed in the following cases.
– When [SYSTEM] menu
¨
[FILE FORMAT] is set to other than [MOV]
– When [SYSTEM] menu
¨
[REC FORMAT] is UHD
•
The lighting status of the tally lamps changes according to start or stop of recording on card slot 1.
•
Time code is fixed to free run.
•
Control of recording operation of the external equipment (such as recorder) connected to the <SDI OUT> terminal
*
and the
<HDMI> terminal is linked to the start/stop recording of the card slot 1.
•
In the background recording mode, the USER button assigned to [DEL LAST CLIP] does not work.
•
The memory card in card slot 1 can be replaced even while background recording is performed on card slot 2 if recording
on card slot 1 is stopped.
•
In the background recording mode, standard recording can be performed on card slot 1 if a memory card for recording is not
inserted in card slot 2 or the remaining recording capacity of the memory card in card slot 2 has run out.
•
When the capacity in the memory card in card slot 2 runs out during recording, background recording will not start
automatically even if you replace the memory card in card slot 2.
•
There are recording functions that cannot be used simultaneously. (
Î
Recording function that cannot be used
)
* When using
, the <SDI OUT> terminal can be used.
•
The background recording on card slot 2 cannot end while recording is performed on card slot 1. End the background
recording while recording is stopped on card slot 1.
•
The background recording on card slot 2 ends in the following cases.
– When the power is turned off
– When the remaining recording capacity of the memory card has run out
– When an error has occurred when writing to the memory card
