Panasonic HC-X2 Operating Instructions Manual Download

Page: 209 / 313

Convenient shooting functions – Focus assist function

209

Setting the mode for enlarged display function

Select the mode for the enlarged display function in the [VIDEO OUT/LCD/VF] menu

[FOCUS ASSIST]

[EXPAND MODE].

[10SEC]:

Disables the enlarged display function after 10 seconds have elapsed.

[HOLD]:

Enables the enlarged display function until the <FOCUS ASSIST> button is pressed again.

[UNTIL REC]:

Enables the enlarged display function until starting the recording operation.

Setting the enlargement rate

Select the enlargement rate in the [VIDEO OUT/LCD/VF] menu

[FOCUS ASSIST]

[EXPAND VALUE].

•

The enlargement rate can be selected from [×2], [×3], or [×4].

Setting the enlargement position

You can select the central position of the enlarged display from the 9 base points.

(A) Base point
(B) Screen actually recorded
(C) Enlarged display part

In the case of the multidial:
Turn the multidial to move the enlarged position. It will return to center when the multidial is pressed.

In case of touching the LCD monitor:
The enlarged position will move by touching the vertical and horizontal arrow markers on the LCD monitor.

Peaking display

The peaking display will outline the contour of the focused image in red, green, or white.

(A) Peaking display

Displaying the peaking display

Set so enable/disable of peaking display can be switched with a <FOCUS ASSIST> button.

Set the <AUTO/MANU> switch to <MANU> to switch to manual mode.

(A)

(B)

(C)

(A)

Summary of Contents for HC-X2


























































































































































































































































































































Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands

Panasonic HC-X2, Operating Instructions Manual

Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands