Panasonic HC-X2 Operating Instructions Manual Download

Page: 64 / 313

Settings before recording – Setting of time data

Supplying the time code externally [X2]

The time code output from the camera corresponding to the camera video or the playback video can be supplied to
an external recording device.

(A) <SDI OUT> terminal
(B) SDI IN terminal
(C) <TC IN/OUT> terminal
(D) TC IN terminal
(E) VTR, etc.

Select the [RECORDING] menu

[TC/UB]

[TC IN/OUT SEL]

[TC OUT].

Select the [RECORDING] menu

[TC/UB]

[TC OUT REF]

[RECORDING].

The same time code can be recorded to the video of the same time on two devices.

To match the time code output from the <TC IN/OUT> terminal to the video of the SDI
output or the monitor output

Select the [RECORDING] menu

[TC/UB]

[TC OUT REF]

[SDI OUT].

•

TCR is output during playback. TCG output during playback is not supported.

•

The time code output may shift by 1 frame when the frame rate of [REC FORMAT] is set to 23.98p.

•

Output of user bits is not supported.

(A)

(B)

(C)

(D)

(E)

Summary of Contents for HC-X2


























































































































































































































































































































Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands

Panasonic HC-X2, Operating Instructions Manual

Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands