Panasonic GT703, User Manual

Page: 90 / 105

Specifications
6-2
6.1 GT703 Specifications
6.1.1 General Specifications
Item
Specifications
24 V DC type
5V DC type
Rated voltage 24 V DC 5 V DC
Operating voltage
range
21.6 to 26.4 V DC
4.5 to 5.5 V DC
Power consumption 2.4 W or less (100 mA or less). 2W or less (400 mA or less). (Note 1)
Operating ambient
temperature
0 to +50 ° C
Operating ambient
humidity
20 to 85% RH (at 25?), non-condensing
Storage ambient
temperature
-20 to +60 ° C
Storage ambient
humidity
10 to 85% RH (at 25 ° C), non-condensing
Breakdown voltage
Between [power supply terminals] and [case]
500 V AC for 1 minute, Cutoff current: 10 mA (at default setting)
Insulation resistance
Between [power supply terminals] and [case]
100 MΩ or more, 500 V DC, measured with megohmmeter (at default setting)
Vibration resistance
Conforms to IEC61131-2.
5 to 8.4 Hz, 3.5-mm single amplitude
8.4 to 150 Hz, Acceleration 9.8 m/s
2
10 sweeps each in X, Y and Z directions (1 octave/min)
Shock resistance
Conforms to JISB3502 and IEC61131-2.
147m/s
2
or more, 3 times in the X, Y, Z directions
EU Directive
applicable standard
EN61131-2 (EMC Directive)
Noise resistance
1,000 V [P-P], Pulse width 50 ns, 1 µs between power supply terminals (based on in-
house measurements) (Note 2)
Electrostatic
discharge resistance
4 kV (Contact discharge)
Protective
construction
IP67 (Initial value, evaluated by us)
Dustproof and waterproof from front panel only (packing used on panel contact surface)
(Note 3)
Weight (main unit) Approx. 180 g
(Note 1): The power cannot be supplied from the tool port of a PLC (CPU unit).
(Note 2): When using our exclusive cable.
(Note 3): When installing the unit again, replace the water-proof packing.