Panasonic GT703, User Manual

Page: 26 / 105

Installation and Wiring
3-2
3.1 Installation
3.1.1 Installation Environment
When installing and using the GT series, always make sure the following conditions are
observed.

Usage conditions
• Ambient temperature: 0 to +50 ° C
• Ambient humidity should be 20 to 85% RH (at 25 ° C) and non-condensing.
• Usable altitude: 2000 m above sea level or lower
• For use in pollution Degree 2 environment
• Do not use it in the following environments.
-
Direct sunlight, wind and rain. (This product is not designed for outdoor use.)
-
Inflammable or corrosive gas.
-
Excessive airborne dust, metal particles or saline matter.
-
Benzine, paint thinner, alcohol or other organic solvents or strong alkaline solutions such
as ammonia or caustic soda.
-
Direct vibration, shock or places always exposed to drop of water.
-
(This unit is warranted by IP67 for panel mounting, however, this applies to initial values.)
-
Influence from power transmission lines, high voltage equipment, power cables, power
equipment, radio transmitters, or any other equipment that would generate high
switching surges. (100mm or more)

Static electricity
• Do not touch connector pins directly to prevent static electricity from causing damage.
• Always rid yourself of any static electricity before handling this product.
• If excessive static electricity is applied to the panel surface, the LCD panel may be
damaged.