Panasonic GT703, User Manual

Page: 24 / 105

Names and Functions of Parts
2-10
IP address: When it is not displayed, set the property of the TCP/IP in the items such as
Network of the control panel. IP address can be input or changed.
Note) The setting procedure varies depending on the OS used. For the details, refer to
the manual/help of the OS.
Port no.: Set to 0 or within the range of 1025 to 65535 in decimal.
When used in GTWIN, set it to “0”.
Setting of destination device (GT side)
IP address: Specify the IP address of the GT to be connected in decimal.
Port no.: Set it within the range of 1 to 65535 in decimal. (Default: 9094)
Specify the same setting as that of GT.
Communication time out : Set the time-out period after connection establishment for every
communication within the range of 1 to 950 seconds. (Default: 15) (it is not linked to this
setting until a connection is established.)
Connection time out : Set the time-out period until connection establishment within the range
of 1 to 180 seconds. (Default: 60)
Setting with IP search tool (Config WD.exe)
The settings of the GT can be specified with the IP address search tool of Configurator WD
(Ver.1.74 or later).
The IP search tool (Config WD.exe) can be downloaded for free from our website.
URL: http://industrial.panasonic.com/ac/e/dl_center/software/ (User registration is required.:
Free of charge)