Panasonic GT703, User Manual

Page: 88 / 105

Troubleshooting
5-12
5.2.8 When Performing General-purpose Serial Communication
Error code Error name Countermeasures
**0000 BCC error
The value of BCC may be incorrect. Check if there is no
calculation mistake.
**0001 Format error A command format may be incorrect. Check if it is correct.
**0002 NOT support error
A command used is not supported with the version of the GT.
Upgrade the version of the GT, or use another command.
**0003 Address error
The address specified does not exist in the GT. Check the
address of the sent command.
**0004
Receive buffer
Overflow
The sent command exceeds the receivable number of bytes.
Check the number of bytes of the sent command.
**0005 Requested overflow
The sent readout command exceeds the number of bytes that can
send back. Check the number of the read words.
**0006 Data error
The communication condition for the GT may be unmatched with
the condition for a destination device. Check the communication
conditions.
**0007 Data write inhibit error
A command for the address that writing is not available was sent.
Check the address of the sent command.