Panasonic FPSIGMA, Technical Manual

Page: 82 / 94

Programming Example, FP-FNS Block BACnet MS/TP
81
If inputs are not used, just leave the corresponding pins unconnected.
PLC types: available for FP

.
Variables of this function block have to be of one of the following data types:
Inputs
Input Data Type Function
iSlotNo INT Installation position of the FNS unit
pAnalogValues POINTER Pointer to the Analog Value input
process data table
pAnalogValuesVarConfig POINTER Pointer to the Analog Value input's
configuration data table
pAnalogValuesVarNames POINTER Pointer to the Analog Value input's
process data variable names
pAnalogValuesIDNumbers POINTER Pointer to the Analog value ID numbers
pBinaryValues POINTER
Pointer to the Binary Value input process
data table
pBinaryValuesVarNames POINTER Pointer to the Binary Value input's
process data variable names
pBinaryValuesIDNumber POINTER PPointer to the Binary Value ID
Numbers
pMultistateValues POINTER Pointer to the Multistate Value input
process data table
pMultistateValuesVarNames POINTER Pointer to the Multistate Value input's
process data variable names
pMultistateValuesVarText POINTER Pointer to the Multistate Value input's
process data variables' text
pMultistateValuesIDNumber POINTER Pointer to the Multistate Value ID
Numbers
pMultistateValuesStateTextOrderNr POINTER Pointer to the Multistate Value State
Text Order Number
iWatchdogTime_ms INT Watchdog timeout value for the unit in
ms. Valid values from 1 to 32767. 0:
default of 700ms.
ModuleConfig DUT BACnetMSTP_DeviceInit Data unit type to configure the module.
Outputs
Output Data Type Function
sName STRING[16] Name of installed FP-FNS block
sBusType STRING[20] Network type of installed FP-FNS block
bOnline BOOL Flag for online status
bError BOOL Error flag
wErrorCode WORD Error code if error flag is set