Panasonic FPSIGMA, Technical Manual

Page: 22 / 94

FP-FNS Blocks
21
Network Status
During start-up, a test sequence is performed on this LED.
State Indication Comments
Off Offline No power, or no IP address
Green Online (RUN)

On-line, one or more BACnet messages have arrived

Module has active COV subscriptions

At least one value object has one or more events
enabled
Green,flashing Online, waiting Waiting for first BACnet message
Red Duplicate IP address FATAL error
Red, flashing Connection timeout

No BACnet message has been received within the
configured 'process active timeout’ time.

A COV or Alarm/Event notification could not be sent
to its recipient.
Module Status
During start-up, a test sequence is performed on this LED.
State Indication Comments
Off No power FP-FNS state = 'SETUP¨' or 'NW_INIT'
Green Normal operation FP-FNS has left the 'NW_INIT' state
Red/green, alternating
Firmware update from file
system in progress
Red Major fault EXCEPTION-state, FATAL error etc.
Red, flashing Recoverable fault(s)
LINK/Activity LED
LED State Indication Comments
Off No Link No link, no communication present
Green Link (100 Mbit/s) established Ethernet link established, no
communication present
Green, flickering (10Hz) Activity (100 Mbit/s) Ethernet link established,
communication present
Yellow Link (10 Mbit/s) established Ethernet link established, no
communication present
Yellow, flickering (10Hz) Activity (10 Mbit/s)
Ethernet link established,
communication present