Panasonic FPSIGMA, Technical Manual

Page: 20 / 94

FP-FNS Blocks
19
2.4.4 FP-FNS Block PROFINET IO
This FP-FNS block connects the unit to a PROFINET IO network.
Front view No. Item
1
Network status LED
2
Module status LED
3
Ethernet port 1
4
Ethernet port 2
5
Link/Activity LED (port 1)
6
Link/Activity LED (port 2)
Network Status
During start-up, a test sequence is performed on this LED.
State Indication Comments
Off Offline No power, or no connection with the IO controller
Green Online (RUN)

Connection with IO controller established

IO controller in RUN state
Green, flashing Online (STOP)

Connection with IO controller established

IO controller in STOP state
Module Status
During start-up, a test sequence is performed on this LED.
State Indication Comments
Off No power or not initialized FP-FNS state = 'SETUP¨' or 'NW_INIT'
Green Normal operation FP-FNS has left the 'NW_INIT' state
Green, 1 flash Diagnostic event(s) Diagnostic event(s) present
Green, 2 flashes Blink Used by engineering tools to identify the
node on the network.