manualshive.com logo in svg

Panasonic FP-M Hardware, Manual

Share
Download
Panasonic FP-M Hardware Manual Download Page 63

5) Wiring for I/O connectors (MIL connector)

• There are the following 4 methods for wiring to the I/O connectors (MIL connectors) on each board.

55

4-3. Wiring

9600

19200

EPROM

RUN REMOTE PROG.

RUN PROG. ERR ALARM.

(BATT.)

EPROM

• The I/O connector on the board and the connector on

the CT-2 connector terminal can be connected using a
cable. Input wiring and transistor output wiring is easy.

• The terminals are connected using a cable. This

eliminates the work required for wiring.

• Control of up to 2 A is possible using this terminal, and

maintenance and inspection such as relay replacements
are easy.

• A twisted wire (0.2 to 0.3 mm-squared) can be

connected directly.

• The wiring can be done easily using wires with the

covers on, and a pressure welder. 

• Wiring mistakes can also be corrected easily.

• Wiring can be done easily using a flat cable with a

connector on only one end.

CT-2 connector terminal

RT-2 relay terminal

Wire-press socket

Flat cable connector

Summary of Contents for FP-M Hardware













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands