manualshive.com logo in svg

Panasonic FP-M Hardware, Manual

Share
Download
Panasonic FP-M Hardware Manual Download Page 52

4-2. Installation

1. Panel Mount

1) Board type mounting method (without mounting plate)

• Mount the stacked boards on the panel with four M3 size screws as follows.

2) Case type mounting method (using mounting plate)

• Mount the mounting plate on the panel with four M4 size screws as follows.

2. DIN Rail Mount

FP-M case type

DIN rail
attachment lever

DIN rail

Slotted
screwdriver

1

2

FP-M 
case type

DIN rail
attachment lever

DIN rail

Claw

■

Attachment

• Put the claw of the FP-M mounting plate on the DIN

rail and attach the FP-M on the rail.

■

Detachment

• To detach the FP-M from the DIN rail, pull the lever

down with a slotted screwdriver.  

Panel

M4 size 
screws

Mounting plate

205 mm (8.071 in.)

70 mm (2.756 in.)

Mounting hole dimension

4-M4 or 4-5 dia.

Panel

M3 size screws

174 mm (6.850 in.)

70 mm (2.756 in.)

4-M3 or 4-4 dia.

Mounting hole dimension

44

4-2. Installation

Summary of Contents for FP-M Hardware













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands