manualshive.com logo in svg

Panasonic FP-M Hardware, Manual

Share
Download
Panasonic FP-M Hardware Manual Download Page 133

125

6-4. Maintenance

6-4. Maintenance

Although programmable controllers have been designed in such a way to minimize maintenance and offer trouble-
free operation, several maintenance aspects should be taken into consideration. If preventive maintenance is
performed periodically, you will minimize the possibility of system malfunctions.

1. Replacement of Backup Battery

1) Battery life

• When the voltage of the backup battery lowers, special internal relays R9005 and R9006 turn ON and the ERR.

LED turns ON. Replace the backup battery within a month after this battery error is detected.

2) Using backup battery type

Caution:

3) How to replace backup battery

• Replace the battery within 3 minutes, after applying the power to the FP-M control board more than 1 minute.

Procedure 

1

Turn OFF the power of FP-M control board.

2

Lift the backup battery on the FP-M control board
using insulated slotted screwdriver as shown on the
right.

3

Remove the backup battery from the backup battery
holder as shown on the right.

4

With the + side facing up, insert the new backup
battery into the backup battery holder by sliding it in
sideways as shown on the right.

5

Turn ON the power of the FP-M control board.

Note:

• Before inserting the new battery, check that nothing is attached to the + and – surfaces. 

• Never throw batteries into a fire. Do not dispose of them in trash that will be incinerated.

Item 

Backup battery

Description

Lithium battery, BR2032/CR2032 type or equivalent      

For all FP-M control boards

Part number 

AFB8801

Control board 

C20R, C20T, and C32T types    

C20RC, C20TC, and C32TC types 

           Battery life (at 25 ˚C/77 ˚F ambient temperature)

Approx. 53,000 hours (approx. 6 years) 

Approx. 27,000 hours (approx. 3 years)

New backup 
battery (+ side)

Backup battery holder

Backup battery

Insulated slotted
screwdriver

Backup battery holder

Summary of Contents for FP-M Hardware













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands