Panasonic FP-M Hardware, Manual

Page: 138 / 268

130
7-1. Analog I/O Board
3. Parts Terminology
Supplies power (24 V DC) to the analog board using the expansion
power supply cable.
Connect the input field devices (e.g., limit switch). This terminal
block is removable.
Connect the input/output field devices (e.g., limit switch,
solenoid). This terminal block is removable.
Connects the control board with internal circuit.
Sets the special data register for storing analog input and output
data by selecting the board number.
The analog I/O ranges are selectable with jumper pins on the
board.
1
Expansion power supply connector:
2
Input terminal (15-pin):
3
Input/output terminal (12-pin):
4
Expansion connector:
5
Board number selector:
(See following page.)
6
Analog range selectors:
(See following page.)
        
3 Input/output terminal 2 Input terminal
4 Expansion connector
1
Expansion power
supply connector
JP4
B
A
JP3 JP2
B
A
JP5
B
A B
A
5
Board number selector
6
Analog range selectors
          
JP1
            