Panasonic FOMA P900iV, Manual

Page: 85 / 404

Making
Calls/Receiving
Calls
83
●
“ ”, “ ” or “ ” is displayed when the ring volume is set to “Silent”.
S: SILENT
: The ring volume is “Silent” for phone calls only.
: The ring volume is “Silent” for mail and messages only.
: The ring volume is “Silent” for phone calls, mail and messages.
Ring
V
olume
You can adjust the ring volume for incoming calls and mail to any of six levels.
You can switch it off (Silent) for when it must not ring such as during a meeting, and can also
set it to grow progressively louder (Step). When the ring volume is set to “Silent”, the ring tone
does not sound for any incoming calls. You can check receiving calls or mail by the flickering of
Call/Charging indicator and Command Navigation key, and the display of the Private Window.
Incoming call Ring volume
Phone/Video-phone ············For adjusting the ring volume for voice calls and video-phone calls.
Mail/Message ······················For adjusting the ring volume for i-mode mail, Message R/F and Short Message (SMS).
1
Use to adjust the volume
Step ·····································The ring tone is silent for approximately three seconds, and then
the volume steps up every three seconds, from Level 1 through
Level 6.
Levels 1 to 6 ························Level 1 is the weakest volume and Level 6 the loudest.
Silent ···································The ring tone does not sound.
2
When the ring volume
for Phone/Video-phone
is being adjusted
●
You cannot adjust the ring volume during ringing.
●
If you change the ring volume by using “Phone/Video-phone”, the volume of the keypad sound changes as well. When
set to “Step”, the keypad sounds at Level 2.
Information
<Ring Volume>
Setting at purchase
Level 4
Adjusting Ring Volume
P.33