Panasonic FOMA P900iV, Manual

Page: 183 / 404

181
Changing
Tone
Settings
Select
Ring
Tone
Select a type of ring tone or i-motion
Buzzer/Effect/Melody ············Selects from the ring tone list.
i
motion/Camera·················Selects a moving image from the “Camera” folder (see page 356 of “Applications”
manual).
i
motion/i-mode ··················Selects a moving image from the “i-mode” folder (see page 356 of “Applications”
manual).
i
motion/Edit ·······················Selects a moving image from the “Edit” folder (see page 356 of “Applications”
manual).
i
mot/Chara-den video········Selects a moving image from the “Chara-den video” folder (see page 356 of
“Applications” manual).
OFF·······································The ring tone does not sound. The setting is completed.
2
Select a ring tone or i-motion
● While you are selecting a ring tone, it sounds for confirmation.
●
If you select “
i
motion/Camera”, “
i
motion/i-mode”, “
i
motion/Edit”, or “
i
mot/Chara-den video” in step 2, you
can play i-motion back for confirmation by pressing ( ). (See page 379 of “Applications” manual)
●
Select “OFF” not to sound the ring tone.
3
Incoming call Select ring tone
Phone ··································Selects a ring tone or i-motion for when a voice call comes in.
Video-phone ························Selects a ring tone or i-motion for when a video-phone call comes in.
Mail······································Selects a ring tone for when i-mode mail or Short Message (SMS) is received.
Skip to step 3.
Msg. Request ······················Selects a ring tone for when Message Request is received. Skip to step 3.
Msg. Free ····························Selects a ring tone for when Message Free is received. Skip to step 3.
1
Set Ring Tone
●
Use “Ring volume” to adjust the ring volume that sounds while you are selecting a ring tone. However, the ring tone
does not sound if you set the ring volume to “Silent”.
●
For a melody that is downloaded from site or attached to mail as an attachment, or a melody prohibited to attach to mail
or output to other terminals than the FOMA phone, a playing part may be specified in advance. The specified part only
is played if you set that melody for the ring tone.
● For a call from the phone number that does not notify the Caller ID, you can select the “Call setting w/o ID” to set the
ring tone. (See page 165)
●
You cannot set the following i-motion for the ring tone (Movie Ring Tone).
・
i-motion without sound
・
i-motion that does not supports Movie Ring Tone
・
i-motion with ticker
・
i-motion whose playback is restricted
・
i-motion downloaded from i-motion mail
・
i-motion that is not shot by the camera when “
i
motion/Camera” or “
i
motion/Edit” is selected in step 2
You can check “File property” for whether the file can be set for a movie ring tone. (See page 366 of “Applications”
manual)
Information
P.33