Panasonic FOMA P900iV, Manual

Page: 186 / 404

184
Changing
Tone
Settings
Voice
Announce
<Voice Announce>
Using Recorded Sound as Ring Tone
You can use any sound, such as your recorded voice, for ring tones, hold tones, an alarm for
“Alarm”, “Schedule”, and “ToDo”, and an answer message for Record Message.
You can record up to two items for approximately 15 seconds for each.
You can record own voice onto “Voice announce 1” and “Voice announce 2”.
Record
Voice announce
Voice announce 1 or Voice announce 2 Record
●
If nothing is recorded, “Play”, “Erase”, and “Set start tone” are not displayed.
●
If there is recorded data, a Confirmation display appears asking whether to overwrite the
data.
Select “YES” and press to overwrite.
To cancel, select “NO” and press .
A tone beeps and recording starts.
●
To suspend the recording midway, press or .
●
The tone beeps five seconds before the recording time (approximately 15 seconds) ends.
When the recording ends, the tone beeps twice, the “Recording” display is cleared, and
the former display returns.
1
●
When a call comes in during recording, an alarm for “Alarm”, “Schedule”, or “ToDo” sounds, or when you switch the
Multitask display, the recording is suspended. (The recording content up to that moment is saved.)
●
Press to stop the recording and the Stand-by display returns. (The recording content up to that moment is saved.)
Information
P.33