Panasonic FOMA P900iV, Manual

Page: 228 / 404

226
Using
F
OMA
Phone
to
Manage
Schedule
■
If you set an alarm for “Alarm”, “Schedule”, and “ToDo”, the icons appear on the
desktop.
“ ” ················Displayed when an alarm is set for today (except the setting for passed time).
“ ” ················Displayed when an alarm is set for tomorrow or onward.
※ If you set “Display” of “Clock display” to “OFF”, the icons are not displayed.
■
When the time specified for “Alarm”, “Schedule” or “ToDo” comes
When the specified time comes, the alarm tone sounds for approximately five minutes, and the vibrator works as you
set for “Phone/Video-phone” of “Vibrator”. If you set “Snooze setting” of “Alarm” to “ON”, the alarm tone sounds for
approximately one minute at an interval of five minutes, up to six times, until Snooze is released by pressing .
During a call, the Alarm sounds from the earpiece three times repeatedly. The set alarm message and an animation
linking to the selected icon appear on the display.
●
To clear alarm tone/alarm message and animation from the display
Press any key to stop the alarm tone but the animation turns to a still image and the alarm message remains
displayed. Press any key again (press when you set “Snooze setting” of “Alarm” to “ON”) to clear the
display. You cannot, however, clear the alarm message for the schedule by pressing the side keys, with the
FOMA phone closed. When a call comes in, the alarm tone stops sounding and the alarm message and
displayed animation are cleared.
●
During operations
You can set the way for notifying during operations by “Alarm setting”. (See page 245)
“Operation preferred” ··········Does not notify during operations.
“Alarm preferred” ·················Always notifies.
● When the power is turned off
<Alarm>
You can set the way of notifying when the power is turned off by “Alarm while power OFF”.
“ON”·················Turns the power automatically ON and the alarm tone sounds.
“OFF” ·················The power remains turned OFF and no alarm tone sounds.
<Schedule/ToDo>
Even when the specified time comes, the alarm tone does not sound. The “Missed alarm” icon is not displayed
even after turning the power “ON”.
●
In Manner Mode
<Alarm>
When the specified time comes, the vibrator works. However, the alarm tone sounds if you set the operations in
Manner Mode to “Original” and set “Alarm vol.” to other than “Silent” in that setting.
<Schedule/ToDo>
When the specified time comes, the vibrator works and a message is displayed. However, the alarm tone sounds
if you set the operations in Manner Mode to “Original” and set “Phone vol.” to other than “Silent” in that setting.
●
During All Lock
Even when the specified time comes, the alarm tone does not sound. After releasing “All lock”, the “Missed
alarm” icon is displayed on the desktop the same way when the alarm tone did not sound. (See page 227)
<Alarm only>
If the power is turned “OFF” during “All lock”, the power does not turn “ON” and the “Missed alarm” icon is not
displayed even after releasing “All lock”.
●
During PIM Lock
The alarm tone does not sound even when the specified time comes, regardless of the setting for “Alarm setting”.
After releasing “PIM lock”, the “Missed alarm” icon is displayed.
●
While exchanging to/from SD-PIM
The alarm tone does not sound even when the specified time comes, regardless of the setting for “Alarm setting”.
After exchanging to/from SD-PIM, the alarm tone sounds.
Alarm