Panasonic FOMA P900iV, Manual

Page: 174 / 404

172
Using
P
hone
Functions
Illumination
When a call comes in or mail arrives from the party stored in a group, the illumination set for
respective groups flickers.
You can set the illuminations for all groups in the FOMA phone’s Phonebook except “Group 00”.
You cannot, however, set them for the Phonebook in the UIM. If you have set the illumination by
phone number and mail address, that setting has priority.
Set by Group
P.33
Group setting Select a group ( ) Utilities
Illumination ··························Sets an illumination for when a voice call and video-phone call from the party in the
specified group comes in.
Mail illumination···················Sets an illumination for when i-mode mail or Short Message (SMS) from the party in the
specified group comes in.
1
Select a color
The set item is indicated by “
★
”.
2
■
To release the illumination for group
Select either “Illumination
★
” or “Mail illumination
★
” from the display in step 2 and press .
The setting is released and “
★
” is cleared.
●
You cannot set the illumination during “Keypad dial lock”.
●
Note that “Illumination” of “Utilities” is valid only when the Caller ID is provided. It is advisable to activate “Caller ID
request” in advance.
●
To change the set illumination, release the current setting and proceed.
●
If you store the same phone number or mail address in multiple groups, the illumination set for the group of which phone
number or mail address is accessed initially in the search order of column search has priority.
●
You can set this function for either the group in which secret and ordinary Phonebook entries are together stored or the
group in which only secret entries are stored; however note that this function is disabled if you receive a call or mail from
the secret entry.
●
Use “Utilities” to check which group is set, or to release the setting.
Information
●
You cannot set the illumination during “Keypad dial lock”.
●
Note that “Illumination” of “Utilities” is valid only when the Caller ID is provided. It is advisable to activate “Caller ID
request” in advance.
●
Note that this function is released if you change the specified phone number or mail address.
●
To change the set illumination, release the current setting and proceed.
●
When the other party’s mail address is “phone number@docomo.ne.jp”, you can set the mail illumination even when
that mail address is not stored in but the phone number is stored in the Phonebook.
●
Use “Utilities” to check which phone number or mail address in the Phonebook is set, or to release the setting.
Information