Panasonic FOMA P900iV, Manual

Page: 185 / 404

183
Changing
Tone
Settings
Select
Ring
Tone
When a call comes in or mail arrives from the party stored in a group, the ring tone set for
respective groups sounds.
You can set the ring tones for all groups stored in the FOMA phone’s Phonebook except “Group
00”. You cannot, however, set them for the Phonebook in the UIM.
If you have set the ring tone by phone number or mail address, that setting has priority.
Group setting Select a group ( )
Utilities
Ring tone··································Sets a ring tone or i-motion for when a voice call and
video-phone call from the party in the specified group comes
in. Then, follow from step 2 on page 181 to select the ring
tone or i-motion.
Mail ring tone ···························Sets a ring tone for when i-mode mail or Short Message
(SMS) from the party in the specified group comes in.
Then, follow from step 3 on page 181 to select the ring tone.
The set item is indicated by “
★
”.
1
Set by Group
P.33
■
To release the ring tone for group
Select either “Ring tone
★
” or “Mail ring tone
★
” from the display in step 1 and press .
The setting is released and “
★
” is cleared.
●
You cannot set the ring tone during “Keypad dial lock”.
●
Note that the “Ring tone” setting of “Utilities” is valid only when the Caller ID is provided.
It is advisable to activate “Caller ID request” in advance.
●
To change the set ring tone, release the current setting and proceed.
●
If you store the same phone number or mail address in multiple groups, the ring tone set for the group of which phone
number or mail address is accessed initially in the search order of column search has priority.
● You can set this function for either the group in which secret and ordinary Phonebook entries are together stored or the
group in which only secret entries are stored; however note that this function is disabled if you receive a call or mail from
the secret entry. In that case, the ring tone sounds according to the setting of “Select ring tone” .
●
Use “Utilities” to check which group is set, or to release the setting.
●
The flickering pattern of the Call/Charging Indicator and Command Navigation key differs depending on the setting of
“Illumination”.
Information