Mounting reeler outlet
●Hitch the cord on the cord hook of the outlet to use the fixture.
Retaining the cap of fixture used
(The outlet can expand and contract in the range of
approximately 80 to 180 cm from the mounting surface.)
●Press the pushbutton to slightly pull up the main
body of the outlet. It stops in a position in which
the pushbutton is released.
●To return the main body to the original position,
press and hold the pushbutton to push up the main
body to a position to which you want to return it.
(Releasing the pushbutton will stop it on the spot.)
Up-and-down operation of outlet
●Pull up the plug lever, and then rotate it
counterclockwise by 90 degrees.
Dismounting plug
●
Do not mount the clamp in the opposite direction.
Doing so may result in an electric shock or a fire.
●
Do not use plugs (with an orange lever) for Factory Line 30.
Doing so may result in an electric shock or a fire.
Caution
Procedure for mounting and using reeler outlet plug
14
●To mount the reeler outlet, pull down the plug
lever, and then rotate it clockwise by 90 degrees.
Ground
Polarity indidication
(Grounding side)
(Green line)
Lever（Green）
Terminal pulg B
1 Adjust the polarity
2 Insert
3 Rotate90°
clockwise
Polarity indidication
(Grounding side)
(Green line)
Polarity
indication
Indication
Cord hook
Cord hook
Cord
Duct cover
Opening
Mounting duct cover
15
Mounting and using cord hook
16
●Push the duct cover into the opening of the
duct.
●Put the cord hook in the duct aligning the
marking （Dismount） （Mount）on the hook with
the polarity side of the duct, and then
rotate the
hook clockwise by 90 degrees
.
●Hitch the cord as shown in the figure below.
●Hanging load shall be not more than 5 kg.
●To dismount the hook,
rotate it counterclockwise by 90 degrees
.
Mounting duct cover
Mounting cord hook
Dismounting cord hook
（Mount）
（Dismount）
は
め
る
は
ず
す
は
ず
す
は
め
る
Push
button
Outlet
Cord hook
18
19
