Panasonic DP-3530, Service Manual

Page: 723 / 858

723
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.3.2. Outline of Operation
11.3.2.1. Basic Operations
11.3.2.1.1. Specifications
The Finisher serves to deliver sheets coming from its host machine. The mode of delivery may be non-sort
stack, job offset*, or staple delivery.
The Saddle Unit build into the Finisher is used to fold a stack of sheets coming from the Finisher Unit in half
for delivery.
All these operations are controlled by various commands sent by the Host Machine in addition to the
commands from the Finisher Controller PCB.
The Punch Unit (option) is designed for installation to the Pickup Assembly of the Finisher, and is used to
punch holes in sheets coming from the Host Machine.
The above operations are controlled with various commands from the Finisher Controller PCB as well as
the commands from the Punch Controller PCB.
Fig. 2-001
Caution:
The position of delivery is shifted to the Front/Rear for each stack to assist sorting.
Puncher Unit Drive
System (Puncher Unit;
Option)
Alignment Drive System
Control System
Stapler Drive System
Delivery Drive System
Feed Drive System
Tray Drive System
Saddle Unit Drive System