manualshive.com logo in svg

Panasonic DP-2000, Operating Instructions Manual

Share
Download
Panasonic DP-2000 Operating Instructions Manual Download Page 62

Installation and Configuration (Windows 2000)

62

Printing Defaults...

Print Processor...

Separator Page...

Keep printed documents

After printing, documents are kept in the queue.  The documents are allowed to be reprinted directly from 

the queue regardless of the status of an application.

Enable advanced printing features

Usually enables advanced printing features.  Optional features of the printer (page ordering, booklet 

printing, numbering on sheets) are enabled.  The features can be disabled if a problem occurs regarding 

compatibility.  Disabling the features may disable the printing options also.

                            button

Specifies standard (default) values for the properties (print settings) specifiable for each user.  If a local 

printer is shared, the settings here are used as printing defaults for other users.

Refer to "Configuring the Printer Driver Settings" for detailed settings.  (See page      )

                            button

Specify a print processor and data type to be used for printing.

The processor and data type define operations of printers on Windows 2000.

Usually no change is required in the settings.  Use of a printer on a special application, however, may 

require changes on the settings.

                            button

A Separator page is inserted between documents to be printed.  This function is useful when using one 

printer among two or more users and when printing two or more documents by one operation.  

66 

Summary of Contents for DP-2000





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands