manualshive.com logo in svg

Panasonic DP-2000, Operating Instructions Manual

Share
Download
Panasonic DP-2000 Operating Instructions Manual Download Page 58

Installation and Configuration (Windows 2000)

58

Printing Preferences...

Print Test Page

■

General Tab

Printer Name

Name of the printer specified upon installation is displayed.

Location and Comment

Enter a comment about the location of the printer installation and information about the printer.

If a printer is shared, the location and comment specified in this field appears when another user sets up 

this printer on his/her computer.  After completion of setup, however, changing this comment does not 

update the location and comment appearing on users PCs.

Model

Model name of the printer is displayed.

Features

Functions and settings of the printer are displayed.

                                  button

Changes properties (print settings) specifiable for each user.

Refer to "Configuring the Printer Driver Settings" for details of settings (See page 

58

)

                            button

Prints a test page.  This operation verifies that a printer has been properly installed.

■

66 

Summary of Contents for DP-2000





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands