Panasonic DP-2000 Operating Instructions Manual Download

Page: 102 / 180

Document Manager

102

NOTE

• OCR software (Application such as e-Typist, etc.)

File format

: Select one among TIFF, JPEG, BMP, PNG.

Annotation

: Paste to transmission image as an image.

Image type

: Select one among monochrome, grayscale, RGB color and no conversion.

Resolution

: Resolution of transmission image

Correct slant

: Inclination of document can be automatically corrected.

Eliminate noise

: Noise on document can be removed.

• PC-FAX software

File format

: Select one among TIFF, JPEG, BMP, and PNG.

Annotation

: Paste to transmission image as an image.

Image type

: Select one among monochrome, grayscale, RGB color and no conversion.

Resolution

: Resolution of transmission image

Correct slant

: Inclination of document can be automatically corrected.

Eliminate noise

: Noise on document can be removed.

• E-Mail software (MAPI-compatible mail application such as MS-Outlook, MS-Exchanger, etc.)

File format

: Select one among TIFF, JPEG, BMP, and PNG.

Annotation

: Paste to transmission image as an image.

Image type

: Select one among monochrome, grayscale, RGB color and no conversion.

Resolution

: Resolution of transmission image

Correct slant

: Inclination of document can be automatically corrected.

Eliminate noise

: Noise on document can be removed.

• Others

Only program activation occurs on applications other than above.

• Document Viewer provides a function to add various graphics and texts to an image.

The graphics and texts added to an image are called "Annotation." See "Annotation

Menu" (see page ) for details of annotation.

129

Summary of Contents for DP-2000





















































































































































































Search results

Summary of Contents for DP-2000

Reviews:

Related manuals for DP-2000

Brands by name

Popular brands

Panasonic DP-2000, Operating Instructions Manual

Search results

Summary of Contents for DP-2000

Reviews:

Related manuals for DP-2000

Brands by name

Popular brands